DB2.2 2/1 Channel Bridgeable Stereo 12v Power Amplifier 1240w RMS
464
€
| Genuine Useable RMS Power, 4Ohm (Watts), < 1%THD, 14v | 450×2 |
| Genuine Useable RMS Power, 2Ohm (Watts), < 1%THD, 14v | 620×2 |
| Genuine Useable RMS Power, 4Ohm Bridge (Watts), < 1%THD, 14v | 1240×1 |
| Frequency Response (Hz) | 10-25000 |
| THD Continuous 4 Ohm 1Khz/100Hz (%) | <0.04 |
| Signal To Noise Ratio (db) | >100 |
| LPF (Hz) | 50-120 |
| HPF (Hz) | 50-750 |
| Bass Boost (Db) | 0-18 |
| Boost Frequency (Hz) | 40 |
| Audio Signal Input Voltage (V) | 0.2-8 |
| LPF Slope (Db/Oct) | 24 |
| HPF Slope (Db/Oct) | 24 |
| Amplifier Topology | Class A/B |
| Fuse Rating (Amps) | 4×40 |
| Power Wire Input Gauge (AWG) | 4 |
| Recommended Wiring Kit and Accessories | PWK4.1 RCA5.1 |
| Minimum Recommend Final Load Per Channel (Ohms) | 2 |
| Channel Separation (Db) | >60 |
Technical Highlights:
- High Fidelity Class A/B Topology
- Remote Level Control (Included)
- Line Out For Multi Amp Systems
- Soft Turn On/Off
- Variable Low Pass filter at 24db/oct
- Variable High Pass filter at 24db/oct
- Variable Bass Boost
- Double Sided PCB Circuit Board
- T.D.O.S. Amplifier Protection Circuitry
- O.P.S. Oversized Power Supply
- Up To 6V Ready Pre Amp Input Stage
- Ultra Low THD Audiophile Components
- High Density Cast Aluminium Heatsink Body
- Thermally Efficient Heat-sink Coating
Package included:
- 1 x High Performance Mono Amplifier
- 1 x Remote level control
- 1 x 5m level control cable
- 4 x Self tapping screws
- 4 x 40A Spare Fuses
Producator: BASS FACE
Stare produs
Nou / Cu factură / Cu garanție
Data actualizării anunțului:
08 Ian 2022, 05:33
12
vizualizări
vizualizări
