VAG COM VCDS 22.10 HEX-V2 HQ ATMEGA, ROMANA + ENGLEZA A++

200 Lei
Nota: Ultima versiune de soft disponibila este v22.10 ROMANA + ENGLEZA


Interfata diagnoza tester VCDS/ 21.9 ROMANA / ENGLEZA
Chip Edition: ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561

ATMEGA Hex-v2 is the new generation of vagcom vcds obd2 diagnostic interface for vag vehicles. VCDS Hex-v2 USB Interface VAG 21.9 suport 5M baud rate communication, it is ensure the integrity and efficiency of data transmission..  Atmega162 HEX V2 VCDS 21.9 full active cable For VW Audi Seat Skoda,it is BUG fixes and improvements suport Windows 10 system.

ATMEGA Hex-v2 VCDS 21.9 Features:


Language: Multilanguage
Software Version: VCDS 21.9
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RQ + 9241 + 16V8B +ATA6561
System requirement: Windows XP, Vista, 7, 8 and 10(32-bit and 64-bit)


Functions & Features:
 
1. Fully compatible with almost of VW, Audi, Seat and Skod models through the current
model year, including models using a direct CAN connection for diagnostics.
2. Can use the new 7-Digit PIN/SKC codes to match new keys in almost immobilizer
equipped VW/Audi/Seat/Skod models.
3. Can access almost control modules which require proprietary VAG modes running
the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000
(CAN) and/or KWP7000 (UDS).
4. Completely revised and expanded ROD (ODX) Data. Including coverage for almost
the latest models of cars such as the new 4G-chassis Audi A6. The structure of
our ROD data has also been revised to eliminate much redundancy and keep the
installer size reasonable.
5. Suport for new UDS addresses required for compatibility with new systems
found in latest car models.Auto-Scans now show sub-system label file names.
6. EDC15-16 Mileage reading now includes suport for some EDC15 V6 TDI ECUs.
7. Revised and expanded Label Files More than 350 new or revised files since the
last dataset.
 

HEX V2 Vagcom 21.9  New Features:


Auto Scaun 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
   Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
   008 (Service 22) From the station control module 007 coding (service 1A)
   008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Suport 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to suport diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
    1001.04 (off) (Need to suport diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Suport for dual engine control module


Compared to the previous version, the VAG 21.9 main changes is BUG fixes and improvements.

Atmega162 Hex v2 Vag 21.9 Basic functions


00 Auto Scaun
01 control module unit information
02 read fault codes
03 Output Test
       Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
       Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
10 matching
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function


VAG/VCDS HEX-V2 20.4.2 Packing List:


1 x HEX-V2 VAG 21.9 diagnostic cable
1 x CD with VCDS 21.9  software

Compatibil cu:
Lexus IS

Stare produs
Nou / Cu factură / Cu garanție
Piesă auto compatibilă cu:
Audi A6
Data actualizării anunțului: 23 Apr 2024, 20:51
450
vizualizări