VXDIAG VCX SE Pro 3 in 1 Diagnoza GM/FORD/MAZDA + alte autorizatii optional

Top 3 reasons to get VXDIAG VCX SE Pro 3 In 1:
1. It is the only one VXDIAG VCX SE Pro which can add other software on one machine,this default software is GM Ford Mazda 3 in 1.You can pay to add other car models from GM/FORD/MAZDA/VW/HONDA/VOLVO/TOYOTA/JLR
2.Supported Multi languages
3.Computer OS:WIN7/WIN8/WIN10

Top 5 reasons to get VXDIAG VCX SE Pro 3 In 1:
 
User Notice:Close Antivirus software when install the software.

VXDIAG VCX SE Pro 3 In 1 Functions:

1. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Airbag , Fuel Pumps, etc.)
2. Live Data-stream with Recording & Playback Functions for Main ECUs
3. Read & Clear Diagnostic Trouble Codes (DTCs)
4. Set, Adjust or Remove Speed Governors
5. Automatic vehicle recognition
6. New Software Re-flash for Existing ECUs
7. All Other Dealer Functions
8. Steering Angle Resets
9. Guided Fault Finding
10. Program New Keys
11. DPF Regeneration
12. Brake Bleeding
13. Injector Coding 
  
VXDIAG VCX SE Pro--GM

Version:2016.02

Compatible Software:

Suport PC-based diagnostics with rollout of the Global Diagnostic System GDS & GDS2
Suport GM TIS2WEB online Service Programming System (SPS) with your own G-M account.
Suport Tech2Win application to offering a larger screen with all of the Tech 2 tool functionality
 
Global Diagnostic System (GDS & GDS2)

New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles.
GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
 
Service Programming System (SPS):

You need have your own G-M account if you want to do online programming. Passthrough programming on G-M past model and Global A vehicles
Increase reprogramming speed 20-70% and get ready to service new models For pass-through programming of electronic control units on
all vehicles built since 1996 and future model releases. The VCX Nano KIT is between 20% and 70% faster than Tech 2.For example,
on a new Tahoe hybrid with 7 ECUS, it would normally take 2 full hours to reprogram. But, with VCX Nano the process is completed in just 45 minutes. That’s a 64% difference and means you could service 10vehicles rather than 4in an 8-hour day! The potential to increase revenues is dramatic.
 
Tech2Win Function:

Tech2Win, an application version of the Tech 2 and CANdi (Control Area Network diagnostic interface) moduleTech2Win can
be used during a vehicle road  test, offering a larger screen with all of the Tech 2 tool functionality.
The Tech2Win application offers all of the features and functions of the Tech 2 for Opel, For Saab etc.
 
Suport all models of Cherolet,Buick and Cadillac, multi-languages selection, suport OEM softwares of for gm gds2 and tech2win, run gds2 on Vmware. Suport online diagnostic and programming as OEM tool.
 
VXDIAG VCX SE Pro--FORD&MAZDA

Ford Version:V101
Mazda Version:V104

Can diagnose cars till 2017, it suport online programming, one device suport both Ford IDS and Mazda IDS.
 
Functions tested successfully:

Record and play back live data for ABS, PCM…tested ok
Program and Install new ECUs (PCM, ABS)…tested ok
Read and Clear DTCs…tested ok
Program New Keys for Mazda 6…tested ok
Set, adjust or remove speed governors…tested ok
DPF Regeneration…tested ok
Automatic vehicle recognition…tested ok
All other dealer functions…tested ok
Reset steering angle…tested ok
Find guided fault…tested ok
Injector Coding…tested ok

VXDIAG VCX SE Pro--VW
 
VW Version:4.0
 
Software Features:
Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;
VCX is a standard Passthru programming tool, which can do online ECU programming;
 
VCX Interface Key Features:

1. Fully compatible with SAE J2534;
2. Especially for cars, and all vehicles protocols are compatible with dual Cell processors;
3. Design adapters and cables with self-determination;
4. Fits CE and FCC hardware;
5. Fireware can be updated; 
 
Suport protocols as below:

1.K line (ISO9141-2)
2.High-speed CAN (ISO 11898-2)
3.Low-speed CAN (ISO 11898-3)
4.J1850 (SAE J1850)
5.UDS
6.PWM 

VXDIAG VCX SE Pro--Volvo

Software Version: 2014D

VXDIAG VCX SE Pro--Toyota

Software Version: V12.10.019

VCX Software Features:

Providing drivers consistent with international standard SAE-J2534 / SAE-J2534-1;
VCX is a standard Passthru programming tool, which can do online ECU programming;
VXDIAG VCX NANO PRO--LAND ROVER &JAGUAR
LAND ROVER &JAGUAR Version:V149
VXDIAG VCX NANO PRO--Honda
Honda Version:HDS 3014.011