Programator USBASP USBISP AVR USB ISP ASP ATMEGA8 ATMEGA128 64K 10Pin To 6 Pin Adapter Bord

Description

Module description:

1, onboard ATMega8A-AU chip

2, with power and burn two lights

3, onboard 500mA overcurrent protection self-recovery fuse

4, the target bord supports 5V and 3.3V power supply

Self-applicable automatic speed regulation.

Suitable for WIN8.1/8/7/XP 32-bit / 64-bit, system computer.

The product can be directly connected with the computer USB port, the real USB downloader product, through which the target bord is connected, the single-chip computer can be downloaded and programmed to operate easily, especially suitable for laptop computers, desktop computers, through the USB port programming download and debugging.

Download Features:

1. Suport AT89S51/52 MCU

2. Suport all ASP chips of AVR.

3. The output port is an ATMEL standard port.

4. USB power supply and target bord suport target voltage 5V, can be selected through the jumper cap connection.

5. AUTOSPEED automatic speed regulation firmware, the downloader will automatically track the chip frequency to be programmed, automatically change the speed, to achieve automatic speed regulation.

6. Reserve MOSI, MISO, RET, SCK, VCC, GND. The 6-PIN interface is convenient for users to connect the target bord according to their needs.

7. Reserved PROGRAMMING interfaces. Users can upgrade the download firmware by themselves.

Programming software: AVR_fighter, PROGISP1.66 PROGISP1.67, compile PROGISP1.68 lower or higher will do, to burn the same piece of software, very convenient.

Interface definition:

AT89S51 and S52 series pin and download line corresponding connection definition:

MOSI -- > P1.5

MISO - > P1.6

SCK - > P1.7

/RES——>RST

GND——>GND

5V——>VCC

Chips that suport burning:

51 series

AT89S51AT89S52AT89S53 AT89S8253 AT89S2051 AT89S8252 AT89S4051

AVR Series

AT90can128 AT90can32 AT90can64,AT90pwm2,AT90pwm3,AT90s1200,AT90s2313,AT90s2323,AT90s2343,AT90s4414,AT90S8515,AT90S8535  AT90usb1286,AT90usb1287

Atmega103,Atmega128,Atmega1280,Atmega1281,Atmega16,Atmega161,Atmega162,Atmega163,Atmega164,Atmega165,Atmega168,Atmega169 ,Atmega2560,Atmega2561,Atmega32,Atmega323,Atmega324,Atmega325,Atmega3250,Atmega3259,Atmega328,Atmega329,Atmega3290,Atmeg a406,Atmega48,Atmega64,Atmega640,Atmega644,Atmega645,Atmega6450,Atmega649,Atmega6490,Atmega8,Atmega8515,Atmega8535,Atmeg a88,

Attiny11,Attiny12,Attiny13 ,Attiny15,Attiny22,Attiny2313,Attiny24,

Attiny25,Attiny26,Attiny261, Attiny28,Attiny44, Attiny45,Attiny46,

Attiny46, 1 attiny84, Attiny85 Attiny861

USBASP USBISP AVR Programmer – The Ultimate Tool for AVR Microcontroller Enthusiasts

In the world of electronics and embedded systems, having the right tools can make all the difference. Whether you're a hobbyist, a student, or a professional engineer, the ability to program and debug microcontrollers efficiently is essential. That’s where the USBASP USBISP AVR Programmer comes into play. Designed for ease of use, reliability, and compatibility, this programmer is a must-have for anyone working with AVR microcontrollers. In this article, we’ll take a closer look at what makes this device stand out and how it can enhance your electronics projects.

What is the USBASP USBISP AVR Programmer?

The USBASP USBISP AVR Programmer is a compact and powerful in-system programmer (ISP) designed specifically for AVR microcontrollers. It connects directly to your computer via a USB port and allows you to program a wide range of AVR chips, including popular models like the ATMEGA8, ATMEGA128, and many others. This programmer is ideal for developers who need a reliable and cost-effective solution for programming AVR-based projects.

Unlike traditional programmers that require external power sources or complex setups, the USBASP USBISP is powered entirely through the USB connection, making it incredibly convenient to use. Its small size and lightweight design also make it easy to carry around, whether you're working in a lab, at home, or on the go.

Key Features of the USBASP USBISP AVR Programmer

1. Wide Compatibility with AVR Microcontrollers

One of the standout features of the USBASP USBISP AVR Programmer is its compatibility with a broad range of AVR microcontrollers. Whether you're working with an ATMEGA8, ATMEGA128, or other supported models, this programmer ensures seamless communication and reliable programming. It supports various memory sizes and configurations, making it suitable for both simple and complex projects.

2. USB Interface for Easy Connectivity

The USBASP USBISP connects to your computer via a standard USB port, eliminating the need for additional power supplies or adapters. This makes it an excellent choice for users who want a plug-and-play solution. The USB interface also ensures fast data transfer speeds, reducing programming time and improving overall efficiency.

3. Suport for Windows Operating Systems

The programmer is fully compatible with Windows 7 and other versions of the Windows operating system. This ensures that users can take full advantage of its features without worrying about driver compatibility issues. The installation process is straightforward, and the device is recognized instantly by the system.

4. 64K Flash Memory Suport

With suport for up to 64K flash memory, the USBASP USBISP is capable of handling a wide range of programming tasks. Whether you're uploading a small sketch or a more complex firmware, this programmer delivers consistent performance and reliability.

5. 10-Pin to 6-Pin Adapter Bord

The included 10-pin to 6-pin adapter bord makes it easy to connect the programmer to your target microcontroller. This adapter ensures a secure and stable connection, reducing the risk of programming errors or data loss. It also allows for greater flexibility, as you can use the programmer with different types of AVR boards and development kits.

6. Compact and Durable Design

The USBASP USBISP is built to last, with a compact and durable design that fits easily into any electronics toolkit. Its sturdy construction ensures that it can withstand regular use, making it a long-term investment for any electronics enthusiast.

7. User-Friendly and Easy to Use

Designed with simplicity in mind, the USBASP USBISP is incredibly user-friendly. Even if you're new to microcontroller programming, you'll find it easy to set up and use. The device works seamlessly with popular development environments like AVR Studio, Arduino, and Atmel Studio, allowing you to focus on your project rather than the setup process.

Why Choose the USBASP USBISP AVR Programmer?

There are many programmers on the market, but the USBASP USBISP stands out for several reasons. First and foremost, it offers excellent value for money. Compared to other high-end programmers, the USBASP USBISP is affordable without compromising on performance or reliability. It’s an ideal choice for hobbyists and students who are just getting started with microcontroller programming.

Another major advantage of the USBASP USBISP is its versatility. Whether you're working on a simple LED blinking project or a more advanced robotics application, this programmer can handle it all. Its suport for a wide range of AVR microcontrollers means you can use it across multiple projects and platforms.

Additionally, the USBASP USBISP is known for its stability and consistency. Many users have reported that it performs reliably over time, with minimal issues or errors. This makes it a trusted tool for both casual and professional use.

How to Use the USBASP USBISP AVR Programmer

Using the USBASP USBISP is a straightforward process. Here’s a step-by-step guide to help you get started:

1. Connect the Programmer to Your Computer

Plug the USBASP USBISP into an available USB port on your computer. The device should be recognized automatically, and no additional drivers are required for most systems.

2. Connect the Programmer to the Target Microcontroller

Use the included 10-pin to 6-pin adapter bord to connect the programmer to your target microcontroller. Ensure that the connections are secure and that the pins are properly aligned.

3. Open Your Development Environment

Launch your preferred development environment, such as AVR Studio or Arduino IDE. Make sure that the correct microcontroller model is selected in the settings.

4. Upload Your Code

Write or load your code into the development environment and click the upload buton. The USBASP USBISP will handle the programming process, and you should see a confirmation message once the upload is complete.

5. Test Your Project

Once the programming is done, test your project to ensure that everything is working as expected. If you encounter any issues, double-check your connections and settings.

Applications of the USBASP USBISP AVR Programmer

The USBASP USBISP is a versatile tool that can be used in a wide range of applications. Here are just a few examples of how it can be used:

- Educational Projects

For students and educators, the USBASP USBISP is an excellent tool for learning about microcontroller programming. It allows students to experiment with different AVR chips and develop their own projects.

- Home Automation Systems

The programmer can be used to program microcontrollers for home automation systems, such as smart lighting, temperature control, and security systems.

- Robotics and Embedded Systems

In robotics and embedded systems, the USBASP USBISP is used to program the brains of robots and other devices. It enables developers to create custom firmware and control various components.

- Industrial Applications

In industrial settings, the programmer can be used to program microcontrollers for control systems, sensors, and other automation devices.

Conclusion

The USBASP USBISP AVR Programmer is a powerful and reliable tool for anyone working with AVR microcontrollers. With its wide compatibility, USB interface, and user-friendly design, it’s an essential addition to any electronics toolkit. Whether you're a beginner or an experienced developer, this programmer offers the performance and flexibility you need to bring your projects to life.

Investing in the USBASP USBISP means investing in a tool that will suport your growth and development in the world of electronics. Its affordability, durability, and ease of use make it a top choice for hobbyists, students, and professionals alike. So, if you're looking for a reliable and efficient way to program your AVR microcontrollers, the USBASP USBISP is the perfect solution.